Table of Contents
Advertisement
DISPLAY
Press DISPLAY
to display the current
information
on
the screen.
When theTV
receives
a digital
signal, the digital
information
will appear.
• Channel
number
• Station
name
• Channel
label (if preset)
• Broadcast program name
• V-Chip rating
• Signal type
• Sleep timer
• Audio language
• Program guide
• Picture size
• Resolution
When theTV
receives
a analog signal, the analog
information
will appear.
• Channel
number
• Channel
label (if preset)
• V-Chip rating
• Signal type
• Sleep timer
• Picture size
• Audio information
• Resolution
(Stereo,
SAP or Mono)
Press DISPLAY
again to clear the call display.
NOTE:
• After a few seconds,
DISPLAY screen will return to
normal TV-operation
automatically.
RECALL
This button allows you to go back to the last channel
selected by pressing
RECALL. Press RECALL again to
return to the last channel you were watching.
MUTE
Press MUTE to switch off the sound. The TV's sound
will be silenced
and "Mute" will appear on the screen.
The sound can be switched
back on by pressing
this
button again or the VOL + or -.
SLEEP
To set the TV to turn off after a preset amount
of time,
press SLEEP
on the remote control.The
clock will
count up 10 minutes for each press of the SLEEP
but-
ton (Off, Oh 10m, Oh 20m, ..., 2h 0m). After the sleep
time is programmed,
the display
will appear
briefly
every ten minutes
to remind you that the sleep timer
is operating.
To confirm
the sleep timer setting, press
SLEEP
and the remaining
time will be displayed
for a
few seconds.To
cancel the sleep timer, press SLEEP
repeatedly
until the display
turns to Off.
Quick guide for menu
operation
Call menu and for example:
Select
Language.
1
Press INPUT SELECT
to select TV mode.
2
Press SETUP/TV
MENU. The TV menu screen
will appear.
3
4
5
Press • or • to select "Setup", then press • or
ENTER.
Press • or • to select "Language",
then press
4/•
to select the desired
language.
...on the following
pages the menu can be called
in the same way as here.
Press EXIT to return to the normal screen.
NOTE:
• If no buttons are pressed
for more than about 60
seconds,
the menu screen will return to normal
operation
automatically.
Advertisement
Table of Contents
