Setting Up Anynet; Switching Between Anynet+ Devices - Samsung PN50C7000 User Manual

Advanced Features
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
View TV Changes Anynet+ mode to TV broadcast mode,
Device List Shows the Anynet+ device list,
(devicename) MENU Shows the connected device menus, E.g, If a DVD recorder is connected, the disc menu of
the DVD recorder will appear.
(devicename) INFO Shows the play menu of the connected device. E.g, If a DVD recorder is connected, the
play menu of the DVD recorder will appear.
Recording: (*recorder) Starts recording immediately using the recorder. (This is only available for devices that
support the recording function.)
Stop Recording: (*recorder) Stops recording.
Receiver Sound is played through the receiver,
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is
connected, it will be represented as (*devicename),
Setting Up Anynet+
(_ MENU ITTI_ Application --_Anynet+ (HDMI-CEC) _ ENTERI_
Ill Setup
Anynet+ (HDMI-CEC) (Off/On): To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.
Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off.
If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the TV powers off.
However, a device may not turn off if recording is in progress.
May not be enabled depending on the device.
(
1.
2,
Switching between Anynet+ Devices
Anynet+ devices connected to the TV are listed,
If you cannot find a device you want, press the Red button to refresh the list.
Select a device and press the ENTERI_ button. You can switch to the selected device.
The Device List menu will only appear when you set Anynet+ (HDMI-CEC) to On in the Application menu.
" Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching
operation.
" If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function.
Make sure to switch to an Anynet+ device by using the Device List.
4 English