Setting Up Anynet; Scanning And Switching Between Anynet + Devices - Samsung 450 Series User Manual

Setting Up Anynet +

Anynet + is a function that enables you to control all connected Samsung devices
that support Anynet + with your Samsung TV's remote.
Press the TOOLS button to display Tools menu.
T
You can also display Anynet + menu by selecting Tools → Anynet + (HDMI-CEC).
Setup
❑
You can set the environment for using Anynet + .
1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Input,
then press the ENTERE button.
. Press the ▲ or ▼ button to select Anynet + (HDMI-CEC), then press the ENTERE
button.
. Press the ▲ or ▼ button to select Setup, then press the ENTERE button.
Anynet + (HDMI-CEC)→ Off / On
→ Off / On

To use the Anynet + Function, Anynet + (HDMI-CEC) must be set to On.
When the Anynet + (HDMI-CEC) function is disabled, all the Anynet + related
N
operations are deactivated.
AutoTurnOff→ No / �es → No / �es No / Yes

Setting an Anynet + Device to turn Off Automatically when the TV is Turned Off
The active source on the TV remote must be set to TV to use the Anynet + function.
N
If you set Auto Turn Off to Yes, connected external devices are also turned off when
N
the TV is turned off. If an external device is still recording, it may or may not turn off.
Searching Connections

Searches the all connected devices.
When searching devices completes, the connected devices are listed in the Anynet + menu.

Scanning and Switching between Anynet + Devices

1. Press the TOOLS button. Press the ENTER E button to select
Anynet + (HDMI-CEC).
. Press the ▲ or ▼ button to select Select Device, then press the ENTER E button.
Anynet + devices connected to the TV are listed. If you cannot find a device you want,
N
press the red button to scan for devices.
Only when you set Anynet + (HDMI-CEC) to On in the Setup menu, the Device List
N
menu appears.
. Press the ▲ or ▼ button to select to a particular device and press the ENTER E button.
It is switched to the selected device.
4. If you cannot find a device you want, press the ▲ or ▼ button to select Searching
Connections, then press the ENTER E button.
5. The meassage Configuring Anynet + connection is displayed. When searching devices
completes, the connected devices are listed in the Anynet + menu.
Switching to the selected devices may take up to 2 minutes. You cannot cancel the
N
operation during the switching operation.
The time required to scan for devices is determined by the number of connected devices.
N
When the device scan is complete, the number of devices found are not displayed.
N
Although the TV automatically searches the device list when the TV is turned on via the
N
power button, devices connected to the TV when the TV is on or under some conditions
are not automatically displayed in the device list. Press the red button to search for the
connected device.
If you have selected external input mode by pressing the SOURCE button, you cannot use
N
the Anynet + function. Make sure to switch to an Anynet + device by using the Device List.
Off / On
English - 5
T V Input
Source List : TV
Picture Edit Name
Anynet + (HDMI-CEC)
Sound
Channel
Setup
Input
Move Enter
TV P 1 55
View TV
Select Device
Record
Menu on Device
Device Operation
Receiver :Off
Setup
Move Enter
Return
Setup
Anynet + (HDMI-CEC)
: On
Auto Turn Off : Yes
Searching Connections
Move Enter
TV P 1 55
View TV
Select Device
Record
Menu on Device
Device Operation
Receiver :Off
Setup
Move Enter
Return
Setup
Anynet + (HDMI-CEC)
: On
Auto Turn Off : Yes
Searching Connections
Move Enter
Return
Return
Return