Storage And Maintenance; Remote Control - Samsung LN22D450 User Manual

The cable/set top box remote control • Program the Cable/Sat remote control to operate the TV. Refer to the Cable/Sat user manual
does not turn the TV on or off, or adjust for SAMSUNG TV code.
the volume.
'Mode Not Supported' message. • Ctleck the supported resolution of the TV and adjust the external device's output resolution
accordingly. Refer to resolution settings in ttlis manual.
Caption oil TV menu is greyed out. • Caption call not be selected in the TV menu wtlen connected via HDMI or Component.
• Caption must be activated oil the external device.
There is a plastic smell from the TV. • This smell is normal and will dissipate over time.
TV Signal Strength is unavailable in the • This function is only available with digital channels with an Antenna (RF/Coax) connection (Air
Self Diagnosis Test menu. or Cable). (R 21)
TV is tilted to the right or left side. ,, Remove tile stand base from the TV and reassemble.
Ctlannel menu is grey out (unavailable). ,, Channel menu is only available wtlen the TV source is selected (Antenna or Cable).
Your settings are lost after 30 minutes ,, If TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes.
or every time the TV is turned off. Please change from Store Demo mode to Home Use mode in the Plug & Play procedure.
Press the SOURCE button to select TV mode, go to MENU _ Setup _ Plug & Play
ENTER _.
You have intermittent loss of audio or ,, Ctleck the cable connections and reconnect them.
video. ,, Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the
cables are flexible enough for long term use. Mounting the TV to the wall, we recommend using
cables with 90 degree connectors.
You see small particles wtlen you look ,, This is part of the product's design and is not a defect.
closely at the edge of the frame of the
TV.
POP (TV's internal banner ad) appears ,, Select Home Use under Plug & Play mode.
on the screen. For details, refer to Plug & Play (Initial Setup). (R 7)
This TFT LCD panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However,
there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the
product.
Storage and Maintenance
Eng,,sh 33