Sound Menu; Changing The Preset Sound Mode; Adjusting Sound Settings - Samsung LN22D450 User Manual

Changing the Preset Sound Mode
(_ MENU iTR-_ Sound -+ Mode -_ ENTER E_
Mode
Ill Standard: Selects the normal sound mode.
Ill Music: Emphasizes music over voices,
Ill Movie: Provides the best sound for movies.
Ill Clear Voice: Emphasizes voices over other sounds.
Ill Custom: Recalls your customized sound settings.
Adjusting sound settings
(_ MENU iTrl --_ Sound _ Equalizer _ ENTERE_
Equalizer
Adjusts the sound mode.
Ill Mode: Selects the sound mode among the predefined
settings,
Ill Balance L/R: Adjusts the balance between the right and
left speaker.
Ill 100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth
Adjustment): Adjusts the level of specific bandwidth
frequencies.
Ill Reset: Resets the equalizer to its default settings.
Sound Settings
(_ MENUITTI --_ Sound _ ENTERI_
SRS TruSurround HD (Off ! On) ..........................................................................
SRS TruSurround HD is a patented SRS technology that
solves the problem of playing 5.1 multichannel content
over two speakers. TruSurround delivers a compelling,
virtual surround sound experience through any two-speaker
playback system, including internal television speakers. It is
fully compatible with all multichannel formats.
Preferred Language ....................................................................
(digital channels only)
DigitaI-TV broadcasts are capable of
simultaneous transmission of many
audio tracks (for example, simultaneous
translations of the program into foreign
languages),
You can only select a language among the ones being
broadcasted.
Multi-Track Sound (MTS)
(analog channels only)
Ill Mono: Choose for channels that are
broadcasting in mono or if you are
having difficulty receiving a stereo signal.
Ill Stereo: Choose for channels that are
broadcasting in stereo.
Ill SAP: Choose to listen to the Separate Audio Program,
which is usually a foreign-language translation.
Depending on the particular program being broadcast,
you can listen to Mono, Stereo or SAR
Auto Volume (Off / On)
Because each broadcasting station has its own signal
conditions, the volume may fluctuate each time channel
is changed. This feature lets you automatically adjust the
volume of the desired channel by lowering the sound output
when the modulation signal is high or by raising the sound
output when the modulation signal is low.
Speaker Select
(External Speaker / TV Speaker)
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to External Speaker.
When Speaker Select is set to External Speaker, the
volume and MUTE buttons will not operate and the
sound settings will be limited.
When Speaker Select is set to External Speaker, you
should use these settings.
* TV speaker: Off, External speaker: On
When Speaker Select is set to TV Speaker, you
should use these settings.
* TV speaker: On, External speaker: On
If there is no video signal, both speakers will be mute.
iiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiii
English 17