Samsung LN46A650 User Manual page 50

Option 2: Setting the Clock Automatically
The Clock can be set automatically if you are receiving a digital signal.
1, Press the MENU button to display the menu.
Press the A or _ button to select "Setup", then press the ENTER _ button.
Press the A or T button to select "Time", then press the ENTER _ button.
2, Press the ENTER _ button to select"CIock".
3, Press the ENTER _ button to select"CIock Mode".
Press the A or T button to select "Auto", then press the ENTER _ button.
4, Press the A or T button to select "Time Zone", then press the ENTER
button.
5. Press the _, or T button to highlight the time zone for your local area, then
press the ENTER _ button.
6_
Press the ,i, or T button to select "DST" (Daylight Saving Time), then press
the ENTER _ button. Press the A or T button to select "Off" or "On", then
press the ENTER _ button.
Press the EXIT button to exit.
> Depending on the broadcast station and signal, the auto time may not be
set correctly. If this occurs, set the time manually.
> The Antenna or cable must be connected in order to set the time
automatically.