To Select The Source; To Edit The Input Source Name - Samsung LN46A650 User Manual

To Select the Source
Use to select TV or other external input sources such as DVD players or Cable
Box/Satellite receivers (Set-Top Box) connected to the TV. Use to select the input
source of your choice.
1. Press the MENU button to display the menu.
Press the A. or • button to select "Input", then press the ENTER _ button.
2. Press the ENTER _ button to select "Source List".
Press the ,i, or T button to select signal source, then press the ENTER
button.
>- Available signal sources: TV, AV1, AV2, S-Video, Component1,
Component2, PC, HDMI1, HDMI2/DVl, HDMI3, HDMI4, USB.
>- You can choose only those external devices that are connected to the TV.
In the "Source List", connected inputs will be highlighted and sorted to the
top. Inputs that are not connected will be sorted to the bottom.
>- Using the Color buttons on the remote with the Source list
• Red {Refresh); RefreSheS the €onnecting extema! devices I
. TOOLS (Option): Displays the "Edit Name '_and _'lnformation" menus.
(_ Press the SOURCE button on the remote control to view an external signal
source.
To Edit the input Source Name
Name the device connected to the input jacks to make your input source selection easier.
1. Press the MENU button to display the menu.
Press the A or _' button to select "Input", then press the ENTER _ button.
Press the A or T button to select "Edit Name", then press the ENTER
button.
2, Press the A. or T button to select "AVI", "AV2", "S-Video", "Component1",
"Component2", "PC", "HDMII", "HDMI2/DVI", "HDMI3", "HDMI4" input jack,
then press the ENTER _ button.
3=
Press the A or T button to select "VCR", "DVD", "Cable STB",
"Satellite STB", "PVR STB", "AV Receiver", "Game", "Camcorder", "PC",
"TV", "IPTV", "Blu-Ray', "HD DVD", "Digital Media Adapter" input source, then
press the ENTER _ button.
Press the EXIT button to exit.
>- When a PC with a resolution of 1920 x 1080@60Hz is connected to the
HDMI IN 2 port, you should set the "HDMI2/DVI" mode to "PC" in the "Edit
Name" of the "Input" mode.