Auto Wall-Mount Adjustment (Sold Separately) - Samsung LN46A650 User Manual

Auto Wall-Mount Adjustment (Sold separately)
Once the auto wall mount is installed, your TV's position can be easil adjusted.
Auto Wail-Mount
TV Rear Panet
Entering the menu
t, Press the A, T, 4 or 1_ button on your remote control.
>- The Wall Mount Adjustment screen is displayed.
>- If the Wall Mount Adjustment screen is not displayed when clicking on
a direction button while watching your TV, use the menu to display that
screen.
• Press the MENU button to display the menu. Press the A or T button to select
"Setup", then press the ENTER _ button.
• Press the A or T button to select "External Settings", then press the ENTER
button.
• Press the A or T button to select "Wall-Mount Adjustment", then press the
ENTER C *_ button.
Remembering the Position
2, Adjust to the desired position using the A, T,,_,_ buttons.
>- If you press an arrow button when no OSD is displayed on the TV screen,
the Adjustment screen appears.
then press the ENTER _ button. The position is initialized to the default
setting.
3, Pressthe Blue button.
Press the A and T buttons to select a save mode from either Position 1,
Position 2 or Position 3 in order to save the current position.
>- To not save the current position, press the RETURN button.
>- When selecting a save mode, you cannot use the Color buttons.
4, Press the ENTER I:_ button to save.
>- When Position1 is selected, the message "Current position saved as
Position1" is displayed.
5, Pressthe ENTER C_ button.
>- The saved Position appears on the left side of the OSD.
Moving to the remembered position
t.
2,
Complete Step 1 of "Entering the menu".
Pressing a Color (Red, Green, Yellow) button moves the auto wall mount to
the saved position.
>- You can move the wall mount to one of the 3 pre-set positions by pressing
the Red (Position 1), Green (Position 2) or Yellow (Position 3) buttons.
>- If you adjust the Position after moving to a pre-set position, the position display will disappear.
>- For installation, refer to the Installation Manual provided with the wall mount.
>- For product installation and the installation and moving of the wall mount, make sure to consult a specialized
installation company.
>- This installation manual is to be used when attaching the wall mount to a wall. When attaching to other building
materials, please contact your nearest dealer.
>- The auto wall mount will not work when Anynet + or WISELINK is operating.
>- LN40A650A1F and LN46A650A1F models are not compatible with the older wall mount model (WMN5090A).