Samsung HMX-M20BN User Manual page 55

V EW NG ON A TV SCREEN
Youcan eqoy theenjoywidescreen videoson a HDTV(orthe normal T V}afterrecording videosusingtheHD carncorder.
1o Connect your camcorder to your TV as described previously.
2o Select the playback mode on your camcorder and start to play back videos
• Operatethe camcorder normally.
• If you have used an HDMi cable to connected the camcorder to a
Samsung TV that supports Anynet+, you can control the camcorder
with the TV's remote control. _page 104
j ....
• Adjust the voBme to a moderate level. If the volume is too high, the video information may be distorted.
• If "'IV Display" is "Off," the TV screen does not display the OSD (On Screen Display) menus. '-_page 102
• This camcorder does not output an audio signal when the camcorder is in the video or photo
record modes and connected to a TV. It only outputs an audio signal if it is connected in the video
playback mode. This is not an error.
• When you set the camcorder output resolution to 1080/60p, the camcorder cannot output to the
camcorder's LCD screen and the connected TV simultaneously. The LCD displays "fV display only."
• The camcorder displays recorded images in various configurations, depending on the aspect ratio of the
connected TV and TV Type setting of the camcorder. Set the screen ratio to fit your TV.
images _scorded in a I6!9 rat!o
,, Video Image
,Photo capture !mages
_, Photo !mage
Images recorded in 4:3 ratio
', Video image
• Photo images
,, Photo capture images
Images in the Slow Motion mode
16:9
4:3
16:9
4:3
16:9
4:3
• Refer to page 102 for "TV Type" setting.