Samsung HMX-M20BN User Manual page 38
Hide thumbs
Also See for HMX-M20BN:
- Manual del usuario (143 pages) ,
- User manual (71 pages) ,
- Software manual (9 pages)
Table of Contents
Advertisement
Demo mode automatically
shows you t he major functions
of y our camcorder
so that you c an u se t hem m ore
easil
.............
1.Touch the Menu (_) -_Setting (@) tab-_"Demo" -_"On."
°
....
• Ifyou don't want this function,
touch " Off."
2.To exit the menu, touch t he Exit (Q) orReturn (_) tab.
• The Demo function
starts on the LCD screen.
7_
E_
• Off : Disable the function.
,
On: Enables
the Demo
function.
Using
the Demo function
,
The Demo mode is Canceled
in the following
cases:
If the LCD screen is touched.
If you press any button
(Recording
start/stop,
Q.MENU,
display
(FII)/iCHECK,
SMART AUTO,
MODE,
PHOTO, etc.). However,
the camcorder
enters the Deme mode automatically
after
5 minutes
in STBY mode if it is idle for 5 minutes
without an operation.
If you don't want the
Demo function
to start in that fashion,
set "Demo"
to "Off."
• The Demo function does not operate in the following case:
If "Auto Power Off" is set to "5 Min" and you are using the battery as the power soume, the
Auto Power Off function operates before Demo can start.
This camcorder
supports Anynet+. Anynet_ is an AV network system that lets you control all connected
Samsunq AV devices with an An
erred Samsunq TV remote control.
'1. Touch
the Menu (_)
-_ Setting
(@) tab -_ "Anynet+
(MDMI-CEC)."
_
2. Touch
a desired
submenu
item.
3o To exit the menu,
touch
the Exit (Q) or Return
(F_l) tab.
....................................
•
When
the camcorder
is connected
to the Anynet+
supported
TV, you can operate
some
functions
of the camcorder
using
the TV's remote
control.
• Off: Disable the function.
...............
t..........._.n..i......_.h.e.....A.n.._.n..et_.....!.u..n.._.!.!.._..n.....!.._....._..:!._.b..!.1..d..:
...........................................................................................
When you turn on the camcorder and it is connected
to an Anynet+ supporting lV with an HDMI
cable, the Anynet+ supported
TV automatically turns on. If you do not want to use this Anynet+
function, set "Anynet+
(HDMI-CEC)"
to "Off."
For details about Anynet+ (HDMI-CEC), refer to the user manual of the Samsung Anynet_-
supported
TV.
Advertisement
Table of Contents
