| To set the white balance manually
1. Touch
the Menu
(_)
tab _ "White
Balance"
_
"Custom
WB."
•
The "(_:_) Set White
Balance"
indicator
is displayed.
2.
Fill the screen
with a white
object,
and touch
the (_)
tab.
•
The white balance
setting
is stored.
3. To exit the menu,
touch
the Return
(_)
tab.
•
The stored
white balance
setting
will be applied
the next time
you
record.
• When setting the white balance manually, the subject must be white, otherwise, your camcorder
may not detect an appropriate setting value.
• The adjusted setting remains until you set the white balance again,
•
During normal outdoor recording,
setting to "Auto" may provide better results.
• Cancel the digital zoom function for clear and precise setting, _page
80
•
Reset the white balance if light conditions change.
iSO
ISO sensitivity
function
sets the light sensitivity
of the camcorder's
image sensor.
A higher
ISO
setting
increases
light sensitivity
and allows
the camcorder
to select
a higher
shutter
speed,
thus
reducing
image-shake
when
recording
without
flash
under
dim conditions.
PREC_ECK!
Select the Photo record (_11) mode by pressing the MODE button, _page
27
1. Touch
the Menu
(_)
tab -*"lSO"
-* touch
the desired
submenu
item.
2. To exit the menu,
touch
the Return
(_)
tab.
o Auto: Sets Aperture to Auto,
• 50(_):
Record in a bright place at low sensitivity,
• 100(_:._,): Record in a normal situation at normal sensitivity.
" 200(#_t): Increases the shutter speed and minimizes noise in images
recorded
in a dim place,
• 400(_)/800(&€_)/1600(:_&'_)/2400(r_;_): Record in dim or dark places at
high sensitivity. The recorded images may have noise.
High
ISO values
may cause
noise
in images,
65