[] Auto Wall-Mount Adjustment (Sold Separately) - Samsung LN52A550 User Manual

Auto Wall-iVlount Adjustment (Sold separately)
Once the auto wall mount is installed, your TV's position can be easily adjusted.
TV Rear Panel
EX-LINK Cable
(Not supplied)
Auto Wall=Mount
Entering the menu
1. Press the A, T, 4 or _ button on your remote control.
>- The Wall Mount Adjustment screen is displayed.
>- If the Wall MountAdjustment screen is not displayed when clicking on
a direction button while watching your TV, use the menu to display that
screen.
- Press the MENU button to display the menu. Press the A or T button to select
"Setup", then press the ENTER C# button.
- Press the A or T button to select "External Settings", then press the ENTER
button.
- Press the A or T button to select "Wall-Mount Adjustment", then press the
ENTER _ button.
Remembering the Position
2. Adjust to the desired position using the A,T,4,1_ buttons.
>- If you press an arrow button when no OSD is displayed on the TV screen,
the Adjustment screen appears.
>_ Press the INFO button to reset. Press the _1 or 1_ button to select "Yes",
then press the ENTER _ button. The position is initialized to the default
setting.
3. Press the Blue button.
Press the A and T buttons to select a save mode from either Position 1,
Position 2 or Position 3 in order to save the current position.
>- To not save the current position, press the RETURN button.
>_ When selecting a save mode, you cannot use the Color buttons.
4, Press the ENTER O *_ button to save.
>- When Position1 is selected, the message "Current position saved as
Position1" is displayed.
5, Press the ENTER C_ button.
>_ The saved Position appears on the left side of the OSD.
Moving to the remembered position
1.
1
Complete Step 1 of "Entering the menu".
Pressing a Color (Red, Green, Yellow) button moves the auto wall mount to
the saved position.
>- You can move the wall mount to one of the 3 pre-set positions by pressing the Red (Position 1), Green (Position 2)
or Yellow (Position 3) buttons.
>- If you adjust the position after moving to a pre-set position, the position display will disappear.
>- For installation, refer to the Installation Manual provided with the wall mount.
>- For product installation and the installation and moving of the wall mount, make sure to consult a specialized
installation company.
>- This installation manual is to be used when attaching the wall mount to a wall. When attaching to other building
materials, please contact your nearest dealer.
>- The auto wall mount will not work when Anynet+ or WISELINK is operating.
>- LN37A550P3F, LN40A550P3F and LN46A550P3F models are not compatible with the older wall mount model
(WMN5090A).