Table of Contents
Advertisement
Using the WISELINK
Menu
1.
Press the MENU button. Press the A or T button to select "Application",
then press the ENTER _
button.
2.
Press the A or T button to select "WISELINK",
then press the ENTER
button.
>- The "WISELINK"
menu is displayed.
1
Press the W.LINK button on the remote control to display the "WISELINK"
menu.
Press the SOURCE button on the remote control repeatedly
to select
"USB", then press the ENTER _
button.
^
Press the Red button, then press the A or T button to select the corresponding
USB Memory Device (i.e. if connected
through a hub). Press the ENTER _
button.
>- This function differs depending on the USB Memory Device connected
to TV.
>- The selected USB device name appears at the bottom left of the screen.
4.
Press the 4 or 1_ button to select an icon (Photo, Music, Setup), then press the ENTER G -_ button.
>- To exit "WISELINK"
mode, press the W.LINK
button on the remote control.
Using the Photo List
This menu shows Photo files saved on an USB memory device.
Photo List
1
2.
Press the W.LINK button on the remote control to display the "WISELINK"
menu.
Press the 4 or 1_ button to select "Photo", then press the ENTER
button.
Photo files are displayed.
This menu only shows files whose file extension
is jpg. Files of other
formats such as bmp or tiff will not be displayed.
Press the _
(Play) / ENTER IZ_ button to start the Slide Show.
To move to the previous / next group, press the [_
(REW) or
[_
(FF) button.
When moving to a photo, loading may take a few seconds. At this
point, the loading icon will appear at the screen.
It make take some time to load photo files as Thumbnail
images.
Photos without EXIF information
may not be displayed
as thumbnail
images in the Photo List depending
on the picture quality and
resolution.
Hide quick links:
Advertisement
Table of Contents
