Table of Contents
Advertisement
Option 2: Setting
the Clock Automatically
The Clock can be set automatically
if you are receiving a digital signal.
1.
Press the MENU button to display the menu.
Press the A or T button to select "Setup", then press the ENTER 1:_ button.
Press the A or T button to select "Time", then press the ENTER _
button.
2.
Press the ENTER C# button to select "Clock".
3.
Press the ENTER G# button to select "Clock Mode".
Press the A or T button to select "Auto", then press the ENTER O# button.
4.
Press the A or T button to select "Time Zone", then press the ENTER
button.
5.
Press the A or V button to highlight the time zone for your local area, then
press the ENTER _
button.
1
Press the A or T button to select "DST" (Daylight Saving Time), then press
the ENTER _
button. Press the A or T button to select "Off' or "On", then
press the ENTER _
button.
Press the EXIT button to exit.
>_ Depending
on the broadcast
station and signal, the auto time may not be
set correctly. If this occurs, set the time manually.
>_ The Antenna or cable must be connected
in order to set the time
automatically.
Hide quick links:
Advertisement
Table of Contents
