How To Use - Eureka 5740 series Owner's Manual

HOW TO USE

2
1. Handle Release. Step on handle release to pull handle
back to a comfortable operating position. To lower handle
completely to the floor, depress handle release a second
time.
Store
Operate
Clean
Under
2. Cleaner Height Setting. An adjustment that raises or
lowers the cleaner base to match the type of floor surface.
With the cleaner cord unplugged, set the adjustment to
lowest setting for maximum carpet cleaning. If the cleaner
is difficult to push, move adjustment to next highest
setting until cleaner is comfortable to push. The brush
roll must reach the carpet for effective cleaning. For ease
in moving the adjustment knob, place handle in operating
position and tilt cleaner back to remove weight from front
wheels.
WARNING: Avoid injury. Keep loose clothing, hair,
fingers, and all other parts of body
away from any moving part (such as the
revolving brush).Turn off the switch and
unplug the cleaner before changing the
vacuum cleaner height.
1
Helpful Information:
Before cleaning under
low furniture, check area
first for objects that might
harm the unit or block the
vacuum hose.
NOTE: While using accessories, do not place
cleaner on furniture or steps as the brush
roll may cause damage. Place cleaner
on floor with the handle in storage
position.
1. To use accessories remove hose from lower hose retainer
by lifting up and twisting.
2. Place desired accessory onto end of hose or wand.
Crevice
Wand
Hose or Wand
Dusting/Upholstery Brush
books, lamp shades, shelves, curtains, draperies, cushions
and fabrics.
Crevice Wand
cleans corners, stairs, baseboards, and
between cushions.
Nested extension wands
•
Grasp both wands near ridges.
•
Turn ridge end to center.
Dusting/Upholstery
Brush
is for furniture, blinds,
to add reach.
•
Pull apart.
•
Push wands together.
5