Table of Contents
Advertisement
Motor Filter
Check the motor filter each time you empty the
cyclonic cassette. Clean or replace as needed.
To Clean Motor Filter
1. Remove cyclonic cassette from unit.
2. Remove filter from inside compartment, lower
left side.
3. Shake filter or vacuum with another cleaner
to remove excess dust.
4. Reinstall filter. Slide under back ledge and
filter retainer. Install with colored/smooth side
down.
HEPA Filter
Check the HEPA filter frequently. Replace twice a year or
as needed.
Latch
Obtain replacement filters from a local dealer or order
them from The Eureka Company, Bloomington, IL.
4
Filter Retainer
2 and
4
To remove HEPA Filter
1. Push down latch and pull HEPA filter back.
2. Then lift filter up and remove.
To replace HEPA Filter
1. Place bottom tabs of filter into slots.
2. Rotate filter toward cleaner.
3. Push upward on the latch to secure into place.
A Note on Filters
When vacuuming carpet fresheners or cleaners, powder,
plaster dust, or similar fine substances, the cyclonic
cassette and filters may require more frequent
maintenance.
y
;
y
;
4
Back
Ledge
15
Advertisement
Table of Contents
