Sanitaire 4500 Series Owner's Manual page 12

How To Replace Brush Roll Belt
5. Place new belt around motor pulley.
7
Left side view
6. Place belt around brush roll.
7. Align left end cap with square in base. Push end cap
into place; see left side view.
Use GENUINE EUREKA replacement belt, 54312.
Look for the
12
(continued)
product symbol.
5
8. Pull right side of brush roll to stretch belt. Secure right
end cap into base.
6
9. Rotate brush roll to seat belt.
10. Replace the hood. Make sure hood front is behind
furniture guard. Hood should seat onto self-locating
fastener tabs.
11. Turn fasteners 1/4 turn to lock.
8
9