Eureka 5740 series Owner's Manual page 5

1
3
5
6
7
8
10
Cord Retainer. To use, push electrical cord down into cord retainer.
1
ON/OFF Switch. International symbol I means On, International
2
symbol O means Off.
Dust Cup Latch. Pull up on latch to remove dust cup giving access
3
to the dust cup filter and motor filter.
Filter Door Latch. Push down on latch and pivot out for access to
4
the filter compartment. Push up on latch to close door.
Dust Cup Filter. Clean the dust cup filter frequently to maintain
5
good performance.
Dust Cup. The debris from cleaning is collected in the
6
dust cup.
7 Stair Handle. To use when cleaning stairs.
8 Headlight.
Handle Release. Step on handle release to pull handle
9
back to a comfortable operating position.
2
Cleaner Height Setting. An adjustment that raises or
10
lowers the cleaner base to match the type of floor surface.
4
WARNING: Avoid injury. Keep loose clothing, hair,
9
Helpful Information:
Listen to your cleaner. If you notice a change in the sound of the
motor or a change in performance, it could simply indicate a common
usage or maintenance issue. Such as, a need to raise or lower the
carpet height adjustment, possible blockage in hose or brush roll
area, or a broken or loose brush roll belt. These are all easy to fix
and the instructions are included in this owner's guide. Becoming
familiar with the information in this guide will help you to get the best
possible performance from your new cleaner for many years to come.
fingers, and all other parts of body away from any
moving part (such as the revolving brush). Turn
off the switch and unplug the cleaner before
changing the cleaner height setting.
5