Table of Contents
Advertisement
Click and drag/turn (wheel mouse) to change the output level of
wave file that is playing through analog output ports. Like Input
level fader, Output Level Faders are also able to increase the
level of wave file that plays back through MAYA. In other
words, output level faders don't affect the monitoring level of
input sources.
3. MASTER Level Faders
Controls overall monitoring level of incoming source through
input ports and wave file that is playing through analog output
ports. Unlike Input Level Fader and Output Level Fader,
MASTER level fader indicates 0dB when it is placed at the
most top position. From the position, MASTER level fader
can attenuate monitoring level.
4.Gang Mode
Links the L-R faders for stereo operation. Deselect the Gang
Mode if you need to control the left and right levels
independently.
I N P U T
S E L E C T O R
This is where you can select the one of the analog input sources
among Line Input, CD-ROM and MIC Input to record / monitor
that is routed to the Analog output ports of the MAYA. You can
select only one analog input source at a time.
1.Line
Signal connected to the Input ports of MAYA is selected for
recording and routed to the Analog Output port for input
monitoring.
2.CD-ROM
CD audio signal connected to 4-pin header CD-ROM input of
Audiotrak MAYA is selected for recording and routed to the
Analog Output port for input monitoring.
16
Advertisement
Table of Contents
