Digital Out; Cd Audio Input - Audiotrak MAYA User Manual

RCA type unbalanced analog output. Most of the time you will
be needed to connect these output ports for monitoring purpose.
One of the selected analog input sources will be routed to these
output ports along with internal wave out.

4. Digital Out

Coaxial type digital output port. You can use this output port for
transferring data in digital domain. For example, connecting to
DAT's input port you can send stereo audio data without any loss
while you are monitoring through the analog output ports.

5. CD Audio Input

If your CD-ROM is equipped with a 4-pin analog audio output,
you can import CD audio signal directly to MAYA via this
connector. To use CD-ROM's audio as your input source, select
CD Audio as the Input selection on the MAYA's Control Panel.
12