I N /Out Port Layout; Mic In; Line In L/R; Line Out L/R - Audiotrak MAYA User Manual

If you plan to use MAYA in a digital mastering environment,
you may choose to connect analog outputs of MAYA directly to
your power amplifier's inputs instead of sending it through the
console/mixer.
I N / O U T
The on-board 4-pin header connector provides CD audio input.
If you plan on use the header pin, you should make the
connections before you install MAYA driver. Please read through
this section carefully if you intend to use any of the functions
described below.

MIC In

Analog In L
Analog In R
Analog Out L
Analog Out R
Digital Out
1. MIC In
1/4" TRS jack for the MIC input connector. You can plug your
microphone directly to this connector. Even for the condenser
microphone, which requires phantom power, you just need to
connect them. On the MAYA control panel, you can provide
phantom power.

2. Line In L/R

These are –10dBV unbalanced RCA type connectors. You can
connect analog input sources to these connectors.

3. Line Out L/R

P O R T L A Y O U T
11
CD-In