Obsolete Commands; Esc I [Obsolete Command]; Esc M [Obsolete Command] - Epson TM-U220A Specification

Confidential

6.5 Obsolete Commands

ESC i
GS V, which is the upward-compatible command replacing ESC i, is recommended to use, since ESC i
is an obsolete command in the ESC/POS command system.
[Name] Partial cut (one point left uncut)
[Format] ASCII
Hex
Decimal
[Description] • Executes a partial cut of the roll paper.
• Type of cutting is set according to the installation position of the autocutter.
[Notes]
Partial cut (one point left uncut)
•
Full cut
•
ESC m
GS V, which is the upward-compatible command replacing ESC m, is recommended to use, since
ESC m is an obsolete command in the ESC/POS command system.
[Name] Partial cut (three points left uncut)
[Format] ASCII
Hex
Decimal
[Description] • Executes a partial cut of the roll paper.
[Notes] • Type of cutting is set with the installation position of the autocutter.
Partial cut (one point left uncut)
•
Full cut
•
EPSON
ESC i
1B 69
27 105
ESC m
1B 6D
27 109
TITLE
TM-U220A
Specification
(For Argentina Fiscal)
[obsolete command]
[obsolete command]
SHEET NO.
REVISION
NEXT
A
76
SHEET
75