Negative Mode; Digital Zooming - RCA CC4371 User Manual

Digital Effects (continued)
Negative Mode
The camcorder has a negative mode that lets you turn the image negative.
°
.
Place the camcorder in record-pause.
Make sure the displays appears in the
viewfinder or on the LCD monitor. If
they do not, press DISPLAY.
Repeatedly press DIGITAL EFFECTS
until NEGPOS appears.
;_:.i ;_:.
.....
.
4.
Press REC/PA USE to start recording.
To turn off negative recording, press
REC/PAUSE to pause recording, and
repeatedly press DIGITAL EFFECTS
until no digital effects display appears.
Negative Mode
Normal Mode
Digital Zooming ....................... ......_ ...................................................................... ........................................................................................................... r.................................................
The camcorder has digital zooming that allows you to zoom in on a subject with
magnification up to 130 times. Normal zooming is up to 32 times.
1. Place the camcorder in record-pause.
Make sure the displays appear in the
viewfinder or on the LCD monitor. If
they do not, press DISPLAY.
2. Repeatedly press DIGITAL EFFECTS
until ZM:2 appears. Use the zoom
buttons to zoom in and out. ZOOM
appears when you zoom above 16X.
3. Press REC/PAUSE to start recording.
4. To turn off digital zooming, press
REC/PAUSE to pause recording, and
repeatedly press DIGITAL EFFECTS
until no digital effects display appears.
Note: As the zoom level increases during
digital zooming, the picture will gradually
become less sharp. Use the high zoom levels
mainly for special effects.
Digital Zooming Mode
34