RCA CC4371 User Manual page 15

Replace Light Bulb
Light Case
ht Cover
Reflection
Plate
Lower Hook
To Remove and Replace the Light
Bulb:
1. Press and hold the lower hook of the
light cover while removing the light
cover from the light case.
2. Replace the light bulb.
Note: See the installation instructions
packed with the replacement bulb for
detailed instructions.
3. To replace the light cover, pass the
bulb through the hole of the reflection
plate and attach the lower hook to the
light case on the camcorder.
4. Press gently on the front of the light
cover until it locks into place.
Note: Make sure the front cover of the
light is properly attached.
13