RCA CC618 User Manual page 69

Playback Operation and How to Copy Tapes on the VCR
1. A. Camcorder connected directly to
TV: Turn on the TV and tune it to
the video input channel.
B. Camcorder connected to VCR that
is already connected to TV: Turn
on VCR and place it in the "line" or
"camera mode". (If your VCR does
not have a "line" or "camera
mode", consult the VCR owner's
manual.) Operate the TV as you
normally do to see the signal
coming from the VCR.
2. Place the POWER switch in VCR to
turn on the camcorder. The power
indicator will light.
3. Press PLA Y/PA USE.
• If noise bars appear on the screen,
press TRACKING - or +.
• During playback, use the playback
features on page 65.
4. To copy what the camcorder is playing,
place a blank cassette in the VCR, and
press the VCR's RECORD button.
Note: Make sure the memory-stop feature
is turned off (press COUNTER R/M) or the
camcorder will enter play pause when the
counter reaches M 0:00:00.
5. Press STOP when you are finished.
Viewing What the Camcorder is Seeing (or Recording)
1. A. Camcorder connected directly to 2. Place the POWER switch
TV: Turn on the TV, and tune it to
the video input channel.
B. Camcorder connected to VCR that
is already connected to TV: Turn
on VCR and place it in the "line" or
"camera mode". (If your VCR does
not have a "line" or "camera
mode", consult the VCR owner's
manual.) Operate the TV as you
normally do to see the signal
coming from the VCR.
3.
in CAMERA.
Note: When the camcorder is used as a
camera, turn the TV's volume down to
prevent a high-pitched squeal caused by
feedback.
Press the thumb trigger to begin
recording. You can watch what the
camcorder is seeing (or recording) on
the TV screen.
Notes: The remote control will operate the camcorder.
During record pause, you can use the display feature to see the camcorder's displays on the TV
screen. Details are on pages 50-51.
67