Cleaning The Magnetic Encoder - FARGO electronics HDPii User Manual

RESTRICTED USE ONLY

Cleaning the Magnetic Encoder

Danger: Be sure to disconnect the Printer's power cord whenever performing any
type of maintenance procedure unless otherwise directed.
Step Procedure
1 Open the Front Cover and remove the Film Cartridge.
2 Remove the Magnetic Cover to access the Magnetic Head.
3 Remove the Magnetic Head. See Display A below.
3 Use an alcohol wipe from the cleaning kit to clean the Magnetic Head. See
Display B below.
4 Replace the Magnetic Head and Magnetic Cover.
HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1)
Fargo Electronics, Inc.
Continued on the next page
10-38