Advertisement
INPUTS
XLR Balanced input impedance:
XLR Balanced input sensitivity:
¼" Unbalanced input impedance:
¼" Unbalanced input sensitivity:
AMPLIFIER OUTPUT
Power at 4 ohm load:
THD + N (preamp):
THD + N (power amp):
Frequency response:
CHANNEL EQUALIZATION
Low frequency:
Mid frequency (sweep):
High frequency:
DIRECT OUTPUTS
XLR balanced output level:
XLR balanced output impedance:
¼" unbalanced output level:
¼" unbalanced output impedance:
DIGITAL EFFECTS
Processor type:
Internal processing:
A/D converter
D/A converter:
Dynamic Range:
THD + N (1 kHz)
Sampling rate:
Due to continuing product improvements and changes, all specifications are subject to change without notice.
SHENANDOAH
ENGINEERING SPECIFICATIONS
®
STEREO 80LT
2.2 k ohms
-60 to -30 dBV
300 k ohms
-30 to +4 dBV
40 watts per side RMS, 80 watts total
<0.035%
<0.07%
20 Hz -20 kHz +/- 1dB
125 Hz shelving, +/-15dB
250 Hz - 5 kHz , peaking, +/-12dB
8 kHz shelving, +/-15dB
-30 dBV nominal
150 ohms
+4 dBv nominal
1k ohm
WAVE FRONT™ STEREO DSP engine
24 bit
24 bit - 64X oversampling
24 bit - 128X oversampling
80 dB
<0.01%
48 kHz
Advertisement
