Download Print this page

Genz Benz SHENANDOAH STEREO 80 LT Owner's Manual

Advertisement

Quick Links

FEATURES:
·Lightweight 29 Lb. Design
·24-bit Stereo Studio Quality Digital Effects
·Two Channels w/ 3 Band EQ w/ Sweepable Mids
·Compact Monitor Shape Cabinet Design
·Phantom Power for Condenser Mics
PRODUCT DESCRIPTION - The lightweight Shenandoah
acoustic instrument amplifier featuring stereo digital effects. Each channel is equipped with a ¼" unbalanced line input
and channel 1 is also equipped with an XLR balanced microphone input (with phantom power). The 2 inputs on channel 1
are summed (mixed) together at a 1:1 ratio. Each channel offers a 3 band equalizer with a sweepable midrange frequency
control. Equalization centers were carefully selected for use with acoustic instruments. Each channel also contains indi-
vidual send controls to the stereo digital effects circuit. The channel signals are then summed together, mixed with the
digital effects return and passed on to the internal dual 40 watt power amplifier (80 watts total). The back panel contains
stereo XLR balanced outputs with ground lift switch, stereo unbalanced line outputs, two 1/4" speaker jacks, a headphone
output, and an effects cancel jack.
Owner's Manual
·Stereo 80 Watt Power
·XLR & ¼" Inputs
·Dual 6.5" Woofers & Bullet Tweeters
·XLR Direct Outputs (left & right)
·Speaker Stand Adaptor
®
Stereo 80LT is configured as a 2 channel stereo 80 watt

Advertisement

loading

Summary of Contents for Genz Benz SHENANDOAH STEREO 80 LT

  • Page 1 Owner’s Manual FEATURES: ·Lightweight 29 Lb. Design ·Stereo 80 Watt Power ·24-bit Stereo Studio Quality Digital Effects ·XLR & ¼” Inputs ·Two Channels w/ 3 Band EQ w/ Sweepable Mids ·Dual 6.5” Woofers & Bullet Tweeters ·Compact Monitor Shape Cabinet Design ·XLR Direct Outputs (left & right) ·Phantom Power for Condenser Mics ·Speaker Stand Adaptor ®...
  • Page 2: Front Panel

    FRONT PANEL ® INPUTS - The Shenandoah Stereo 80LT is equipped with two types of input jacks. The ¼” input is unbalanced and “line/instrument level” with a useable sensitivity from 50 mV to 1.6 volt. The input impedance is 220 k ohms. The ¼” input will also accept most active balanced line sources, automatically unbalancing them by recognizing the tip portion of the balanced signal.
  • Page 3: Rear Panel

    ® ACTIVE EQUALIZATION - The Shenandoah Stereo 80LT contains a 3 band (with sweepable mid) active equalizer on both channels 1 and 2. These EQ networks, similar to those found on professional sound consoles, are very useful tools when used correctly. LOW FREQUENCY EQ - The corner frequency of the low frequency section is 125 Hz, shelving curve. This frequency is particularly handy when dealing with low frequency feedback from a big dreadnaught guitar.
  • Page 4 HEADPHONE JACK - This jack, located on the rear panel, allows the user to enjoy the tone of this amp through standard headphones (8-600 ohms). A speaker switch shuts off the internal speakers. EFFECTS CANCEL JACK - A ¼” effects cancel jack is provided on the back panel to mute the internal effects via foot- switch.
  • Page 5: Warranty

    WARRANTY: • Genz Benz warrants this product to be free from defects in materials and workmanship for a period of 3 years from the date of purchase, when purchased from an authorized Genz Benz dealer. • This warranty does not cover normal wear and tear incurred from the normally designed use of the product. •...
  • Page 6: Amplifier Output

    ® SHENANDOAH STEREO 80LT ENGINEERING SPECIFICATIONS INPUTS XLR Balanced input impedance: 2.2 k ohms XLR Balanced input sensitivity: -60 to -30 dBV ¼” Unbalanced input impedance: 300 k ohms ¼” Unbalanced input sensitivity: -30 to +4 dBV AMPLIFIER OUTPUT Power at 4 ohm load: 40 watts per side RMS, 80 watts total THD + N (preamp): <0.035%...
  • Page 7: Declaration Of Conformity

    Declaration of Conformity (89/336 EEC-EMC Directive) Manufacturer’s Name: Genz Benz, a division of KMC Music Company Manufacturer’s Address: 7811 East Pierce Street Scottsdale, AZ 85287, U.S.A. Product Type: Audio Amplifier Model Number: 100/115/230/240 V, 50/60 Hz Effective Date: 01-01-2011 Conforms to the Following Standards: [X] EN 55013: 2001 + A1: 2003 [X] EN 55020: 2002 + A1: 2003 [X] EN 60065...