Advertisement
FRONT PANEL
INPUTS - The Shenandoah
"line/instrument level" with a useable sensitivity from 50 mV to 1.6 volt. The input impedance is 220 k ohms. The ¼"
input will also accept most active balanced line sources, automatically unbalancing them by recognizing the tip portion of
the balanced signal. If an instrument offers an unbalanced output it should be connected to the unbalanced input of the
®
Shenandoah
amp. Additionally, the precision input scaling preamp contains a 45 Hz, 12 dB/octave high pass filter (more
effective and less intrusive than the more common 6 dB filters) and an "RFI" filter (radio frequency interference) to elimi-
nate unwanted noise. The XLR input jack is balanced and "microphone level", with a useable sensitivity from –60 dBv to
-30 dBv. It is not a line level input. It contains a precision full range differential microphone preamp with phantom power.
For use with higher-level sources (such as the balanced line level output from a keyboard or other instruments), a bal-
anced pad network will be necessary to use the balanced input. For instance, a Rapco "Pad Blox",-20 or -30 pad or similar
product could be used.
COMBINING XLR & ¼" INPUTS - A unique feature of the Shenandoah
anced and ¼" unbalanced inputs on channel 1. In many situations, this effectively makes the amplifier function as a 3
channel amplifier. The most effective way to use this feature is to set the volume on the channel using the XLR micro-
phone input and then adjust the level control on the instrument itself (assuming that it has one) to blend levels between
the 2 inputs.
ON-BOARD STUDIO QUALITY STEREO DIGITAL EFFECTS - The Shenandoah
program stereo digital effects processor. We chose to use an industry leader in digital effects processing for realistic, high
quality effects algorithms. Level differences are normal when switching between different effects; just adjust the channel
send and master level controls accordingly. The effects level control on each channel adjusts the send level to the digital
effects processor. The digital effects level in the master section controls the effects return level from the processor. Turn-
ing up the channel effects send will yield lusher effects response. Running the channel effects send lower and the master
level higher will yield softer effects response.
PROGRAM DESCRIPTION
Name
Hall 1
Hall 2
Room 1
Room 2
Room 3
Plate 1
Plate 2
Plate 3
Chorus
Flange
Delay 1
Delay 2
Chorus/ Plate
Chorus/ Room
Reverse Scoop
Pitch Shift Rotary
®
Stereo 80LT is equipped with two types of input jacks. The ¼" input is unbalanced and
Description
Bright hall reverb
Warm hall reverb
Hardwood studio reverb
Ambient room reverb
Warm room reverb for guitars and rhythm instruments.
Classic plate reverb for lead vocals and instruments.
Sizzling bright plate reverb for vocals.
Short "vintage" plate reverb
Stereo chorus (Tonal variations in pitch and volume)
Stereo flanger for jet wash effects.
125ms slapback delay
190ms slapback delay
Chorus with reverb plate
Auto-wah guitar effect with reverb
Mid-range scoop tone
Rotary speaker emulation
®
Stereo 80LT is the ability to mix the XLR bal-
®
Stereo 80LT contains a 24-bit, 16
Advertisement
