Table of Contents
Advertisement
Before
attempting to
operate your
n._mote control, install the batteries
as shown here.
"[_aeremote control produces
an
invisible (infrared)
beam that travels
in a straight line much as the beam
of a flashlight.
For this reason,
when operating
the remote control,
you must point it directly at the front
of the TV without objects between
that can block the infrared
light
beam.
Your remote control is designed to
be very rugged and will withstand
a
considerable
drop. If it receives an
extreme blow, the case is designed
to slightly separate at the seam
rather than fracture.
If this happens,
sJimply squeeze
the case where it
separated
until it snaps back
together.
The operation
of the
remote will probably not be affected.
--Installing/Replacing
Batteries
1. Turn the remote control face
down.
2. Press down on the ridged area of
the battery cover and slide it off.
3.
Install four "AAA" batteries in the
battery compartment as shown.
Make sure you insert the negative
(-) end of each battery first.
4. Replace the cover and turn remote
over-face up.
Notes:
• Never place anything heavy on top of
the remote control or lay it upside-
down. This may accidentally depress
the buttons for a long time and
dischacge the batteries.
• Replace the batteries when the TV fails
to respond to the remote control.
If you programmed your remote to
control other components, you may
have to reprogram the code numbers
when you change the batteries. Try not
to press any buttons while changing
batteries.
6
Advertisement
Table of Contents
