Table of Contents
Advertisement
The VCR I CHAN function lets you
program to which channel the TV
will automatically
tune when you
press the VCRI button on the remote.
Thiis is handy if you connect a VCR
to your TV. You will no longer have
to remember
to which input jacks the
VCR is connected
because
the TV
will remember
for you.
Fourexample,
if you connect a VCR's
AUDIO/VIDEO
OUT jacks to the
TV's INPUT
I jacks (as shown on
page 30), you will no longer have to
remember
to select channel 91 on the
TV to see what the VCR is playing.
By entering channel 91 next to the
VCR 1 CHAN function,
the TV will
automatically
tune to channel 91
each time you press the VCR1 button
on the remote.
This function is especially
convenient
if you have a compatible
VCR that can be operated by the
VCRI button on the remote.
Pressing
VCR1 will then not only turn on the
VCR but also automatically
tune the
TV to the proper channel for viewing
the picture from the VCR. You can
program
most brands of remote-
controllable
VCRs to respond
to the
VCR1 button as described
on
page 33.
The VCR 2 CHAN function works
the same way. It lets you program
to
which channel the TV will
automatically
tune when you press
the VCR2 button on the remote.
You
can program
most brands of remote-
controllable
VCRs to respond
to the
VCR2 button as described
on
page 33. Pressing
the VCR2 button
wi:ll then not only turn on the VCR
butt also automatically
tune the TV to
the proper channel for viewing the
picture from the VCR.
22;
-Setting
Up VCR
Channels
(with or without
remote)
1. Repeatedly press MENU to select
4. If you have another VCR connected
SETUP MENU, and then press + or -
to the TV, press MENU to select the
to display the setup functions.
VCR 2 CHAN function.
Repeatedly press MENU to select the
VCR 1 CHAN function.
2. Enter the channel number you want to
program by pressing two digit buttons
on the remote control. (The channel
number you enter is the channel to
which the TV will tune automatically
when you later press the VCR1 button
on the remote.)
.
Enter the channel number you want
to program by pressing two digit
buttons on the remote control. (This
is the cl-_annelnumber to which the
TV will tune automatically when you
later press the VCR2 button on the
remote.) See the notes below if you
are unsure about which channel
number to enter.
3. Press the + button to program the
channel number you selected into the
TV's memory.
6. Press the + button to program the
channel number you selected into the
VCR 2 CHAN function memory.
Note: Pressing the - button here will turn
off this feature and display
VCR 1 CHAN: OFF again.
Note: Pressing the - button here will
turn off this feature and display
VCR 2 CHAN: OFF again.
Notes about Entering Channel Number:
• Enter channel 91 if VCR is connected to the TV's audio and video INPUT 1 jacks.
• Enter channel 92 if VCR is connected to the TV's au6io and video INPUT 2 jacks.
• Enter channel 90 if you have a Super-VHS VCR that is connected to the TV's
S-VIDEO connector and INPUT 1 audio jacks (labeled L and R/MONO).
• Enter channel 03 (or 04) if you did not use any audio/video cables and connected the
VCR to the TV's round antenna jack labeled CABLE/ANTENNA.
Enter the same
channel number (03 or 04) as the position of the VCR's CH3/CH4 switch. This is
the channel to which you must tune your TV for viewing signals from your VCR.
• Refer to pages 30-31 if you want to review details about connecting your VCR to
your TV.
Advertisement
Table of Contents
