RCA F25649TX51AA9 User Manual page 21

C@nnections Setup
4. Highlight your brand of cable box, and press OK.
If your brand isn't listed, highligllt Not Listed and press OK.
5,
Make sure your cable box is on.
Tune tile cable box to channel 02 (use tile remote control that came with
your cable box, or press the channel buuons on tile cable box).
Press OK (the GLIDE Plus+ syslum starls testing codes).
Important Note: When codt, testing i._in progress, don 'l toJ_cb yoJ_r 7'I_;
VCR, cabh, box or at(}, (?/'the remoh, controt._./br tbese prodz_cts.
,
Look at your cable box. If it is still on and changed to channel 09, tile test
was successful. Highlight Yes, and press OK ($71_I) 3: Cot{fi_J_Ht_g.fiJr a VCR
appem_).
If your cable box didn't change to channel 09 or turned itself off, you have
two choices: No and "&,sttbi._ code again.
7}.st tbi._ code again: If you think the TV, the cable box, or any of tile remote
controls might have been touched or bumped during the test, highligllt Te._t
tbi._ code again and press OK (the GUIDE Plus+ system runs the same set of
codes).
No: If you don't think the test was interrupted, highligllt No and press OK
(GUIDE Plus+ system lusts the next cnde).
Repeat tile previous instructions until the TV finds tile correct cable box
code. Fnlk)w the instructions on tile screen.
Note: [/'the 7'I/can 't.find yoJ_r cable box cod*,, a troz¢ble._booting
checklist appea_:_. Carqfid(_, rc_;ieu each checklist andjbllow the
inst*v_ctions on tbe screen.
Chapter I 19