Advertisement
Standard
VHS VCR (Not S-VHS)
(These connections allow you to record TV programs and play back tapes.)
Preferred
Method
2-Way Signal Splitter**
(for areas with good reception)
(such as RCA #AH047)
//
./
J
/
,ncoming
//
[2_
/
J
Coaxial
Antenna
Cables**
/
(such as RCA #AH065G)
** These optional accessories
(one AH047-2-way
splitter, two
AH065G-antenna
cables, and one
AH077G-audio/video
cable) are
available as a kit under #AVH500.
IN F_)ANT
OUT
TO TV
Back of VCR
AUDIO
Backo,
T,,
HI-FI
OUT
SELECT
OUT
@L@
INPUT
1 ,_
VIDEO
Audio/Video Cable**
_uchas RCA #AH077G
Shown here is the preferred
method of connecting
a VCR to
your TV. This method uses a 2-way signal splitter to run
separate
signals to the VCR and TV. This way you can view
either TV programs
or VCR tapes and not be concerned
about
the position
of the VCR's
TV/VCR
switch.
If your cable
company
requires
a decoder
box for premium
channels,
refer to
page 32.
Note: When connected this way, the audio/video connections from the
VCR to the TV are required for picture-in-picture
viewing and for you
to watch tapes being played by the VCR.
Simplified
Method
Back of TV
Incoming
Cable
Back of VCR
IN F(_ANT
Operation:
• If the VCR is connected
to INPUT
1 jacks as shown, select
channel 91 on the TV to view whatever
the VCR is playing.
• If you connect a second audio/video
device to INPUT2,
select
channel 92 on the TV to view whatever
the second device is
playing.
Note: You can program your TV to automatically select the proper VCR
input channel (91 or 92) when you press the VCRI or VCR2 button.
Details are on page 24.
AUDIO
Ht-FI
OUT
SELECT
OUT
@L@
INPUT
1 -_
/
/
Coaxial Antenna Cable*
(such as RCA #AH037)
Shown here is a simplified
method
of connecting
a VCR to your
TV. If your cable company
requires
a decoder
box for pt'emium
channels,
refer to page 32.
Note: The audio/video connections from the VCR to the TV are
required for picture-in-picture
viewing and for stereo playback from
stereo VCR's.
* Optional
accessories
are available
from most RCA dealers
and
electronics
supply stores.
Operation:
• If the VCR is connected
to INPUT
1 jacks as shown, select
channel 91 on the TV to view whatever
the VCR is playing.
• If you connect a second audio/video
device to INPUT 2, select
channel
92 on the TV to view whatever
the second device is
playing.
Note: You can program your TV to automatically select the proper VCR
input channel (91 or 92) when you press the VCRI or VCR2 button.
Details are on page 24.
35
Advertisement
