Advertisement
Your TV has two separate
antenna
inputs on the back (labeled ANT A
and ANT B) that allow you to connect
two different
signal sources if
desired.
For example,
you can
connect a cable-TV
system to one
input and a home antenna to the other
input.
By changing
the ANTENNA:
A/B
display in the SETUP menu, you can
switch back and forth between
the
two signal sources.
Listed below are some other common
uses of the two antenna
inputs:
• connecting a cable-TV system (or
antenna) to one input and a VCR to the
other.
• connecting
a cable-TV
system
(or
antenna)
to one input and a video game
to the other.
connecting a double-trunk cable
system to both inputs.
connecting a cable-TV
converter/decoder
box that scrambles
only premium channels. Connection
details are on pages 31-32.
connecting a cable-TV system to one
input and an antenna (VHF/UHF) to
the other. This allows you to tune in
local stations that are not included on
your cable system. Remember to
change the CABLE/AIR function as
described on page 16 if using your set
like this.
The Channel Memory
is the list of
channels
your TV will stop on when
you press the CHANNEL
up or down
buttons.
Your TV provides
two
separate
Channel Memories-one
for
ANT A input and one for ANT B
input. This allows you to add or
delete channels
into each channel
memory as desired.
When you use the A UTOPROGRAM
function,
the TV automatically
checks both inputs and sets up a
separate channel memory
for each.
Changing
Antenna Input
(with remote)
.
Press the ANT (Antenna) button on
the remote control to switch from the
ANTA input to the ANT B input.
The color of the channel numbers
will change from blue to yellow to
let you know you are now watching
whatever signal is connected to the
ANT B jack on the back of the TV.
Blue_r
ANTA
_llow_r
ANTB
2. Press the ANT button again to switch
back to ANTA.
The color of the
channel
numbers
will change back to
blue to let you know you are now
watching
whatever
signal source is
connected
to the ANTA
jack.
(without remote)
1. Repeatedly press MENU to select
SETUP MENU and then press +
or - to display setup functions.
Repeatedly press Menu to select
ANTENNA: A/B function.
2. Press the - or + button
to change
the setting.
The screen display
will change
from A to B to let you
know you are now watching
whatever
signal is connected
to
the ANT B jack on the back of the
TV. The color of the channel
numbers
will change from blue to
yellow.
3. Press thc
or +bunon
again to
switch back to ANTA.
The screen
display will change back to
ANTENNA:
A to let you know you
are now watching
whatever
signal
source is connected
to the ANTA
jack on the back of the TV.
23
Advertisement
