Table of Contents
Advertisement
PoE Configuration
Remote access and monitor the attached PD (Powered Device) status by
using Enable/Disable function.
PoE Enabled: POE of the port is able to supply power to the attached PD
(Powered Device)
PD Class: Detect the class of PD
Delivering Power (W): Output power.
Current (mA): The status of the port current
Power output voltage per port
Power Budget Percentage of PoE power has been used
Storm Control
Broadcast storms may occur when a device on your network is malfunctioning,
or if application programs are not well designed or properly configured. If there
is too much broadcast traffic on your network, performance can be severely
degraded or everything can come to complete halt.
You can protect your network from broadcast storms by setting a threshold for
broadcast traffic for each port. Any broadcast packets exceeding the specified
threshold will then be dropped.
Storm Control Configuration
There are three type of traffic which can be rate limited, including broadcast
multicast frame and Flooded Uncast Rate.
Figure 1-12-1
25
Advertisement
Table of Contents
