Power Management Setup - ECS H61H2-TI Manual

Power Management Setup

This page sets up some parameters for system power management operation.
Main
Power Management Setup
Resume By PME
Resume By USB(S3)
EUP Function
Resume By PME (Disabled)
This item specify whether the system will be awakened from power saving modes
when activity or input signal of the specified hardware peripheral or components is
detected.
Resume By USB(S3) (Disabled)
This item allows you to enable/disable the USB device wakeup function from S3
mode.
EUP Function (Enabled)
This item allows user to enable or disable EUP support.
Press <Esc> to return to the Advanced Menu page.
36
Advanced Chipset Frequency/Voltag Boot
H61H2-TI USER MANUAL
Disabled
Disabled
Enabled
Security Exit
About Resume by
PCI/PCI-E/LAN/
Ext . USB3.0 PME
: Select Screen


: Select Item
Enter : Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC : Exit