Using An Ipod Dock; Using An Ipod Wireless System - Yamaha RX-V671 Owner's Manual

Using an iPod dock
Refer to the instruction manual of the iPod dock in addition.
When this unit is in standby mode, connect the iPod
dock to the DOCK jack.
Locate the iPod dock at the distance as far as from this unit.
iPod dock
This unit (rear)
Connect your iPod to the iPod dock and turn on this
unit.
iPod wireless system (receiver)
This unit (rear)
Connect the power cable to an AC wall outlet.
Connect your iPod to the iPod wireless system
(transmitter).
4 On your iPod, select the content and start playback.
This unit automatically turns on and selects "DOCK" as the
input source.
• While an iPod is connected to the iPod dock, the iPod is charged. You can
select whether to charge the iPod when this unit is in standby mode using
"Standby Charge" (p.80) in the "Input" menu.
Using an iPod wireless system
When using an iPod wireless system, operate your iPod itself to
start playback after making a connection. Refer to the instruction
manual of the iPod wireless system in addition.
When the power cable is removed from an AC wall
outlet, connect the iPod wireless system (receiver)
to the DOCK jack.
Locate the iPod wireless system (receiver) at the distance
as far as from this unit.
• You can select whether to control this unit (power on/off, input selection and
volume adjustment) in conjunction with iPod operations using "iPod
Interlock" (p.81) in the "Input" menu. When the iPod interlock function is
disabled, turn on this unit and select the input source manually.
• While the iPod wireless system (transmitter) is placed on the iPod wireless
system (receiver), the iPod is charged. You can select whether to charge the
iPod when this unit is in standby mode using "Standby Charge" (p.80) in the
"Input" menu.
Oa_tion
• When you use iPod controls to adjust volume, the volume may be
unexpectedly loud. This could result in damage to this unit or speakers. If the
volume suddenly increases during playback, remove the iPod from the iPod
wireless system (transmitter) immediately. To prevent this problem, we
recommend using "Max Volume" (p.93) in the "Setup" menu to set the
maximum volume level for this unit.
En 55