Viewing The Current Status; Switching Information On The Front Display; Viewing The Status Information On The Tv - Yamaha RX-V671 Owner's Manual

INFO
Note
• Do not operate this unit during the recovery process (restoring the settings).
Otherwise, the settings may not be restored correctly. When the recovery
finishes, click "OK" to set this unit to standby mode.
• The backup does not contain user information (user account, password, etc.)
or unit-specific information (MAC address, IP address, etc).
Viewing the current status
Switching information on the front display
Press INFO.
Each time you press the key, the display item switches.
SIRIUS
(SIRIUS Satellite
Radio)
DOCK
PC
USB
Channel (channel name), Category (channel
category), Artist/Song (artist name/song title),
Composer (composer name), Antenna level
(antenna reception level), DSP Program (sound
mode name), Audio Decoder (decoder name)
Song (song title), Artist (artist name), Album (album
name), DSP Program (sound mode name), Audio
Decoder (decoder name)
* When using iPod wireless system, Bluetooth
receiver, or during simple play:
Input (input source name), DSP Program (sound
mode name), Audio Decoder (decoder name)
Song (song title), Artist (artist name), Album (album
name), DSP Program (sound mode name), Audio
Decoder (decoder name)
* When iPod is connected via USB, the display item
switches in the same manner as "DOCK".
Station (station name), DSP Program (sound mode
NET RADIO
name), Audio Decoder (decoder name)
Item name
About 3 seconds later, the corresponding information
appears.
Viewing the status information on the TV
Press DISPLAY.
The following information is displayed on the TV.
Input
Information
• Available items vary depending on the selected input source. Also, the
display item can be applied separately to each input source group.
HDMI1 ~5
V-AUX Input (input source name), DSP Program (sound
AVI~6 mode name), Audio Decoder (decoder name)
AUDIO1~2
TUNER Frequency (frequency), DSP Program (sound mode
name), Audio Decoder (decoder name)
Audio
format/
Decoder
Sound
CINEMA DSP status
To close the information display, press DISPLAY.
En 75