Saving Energy - Whirlpool 925 series Use And Care Manual

Saving Energy
• Wash full loads. Running a half-filled
dishwasher uses the same amount of
electricity and hot water as a fully loaded
machine.
• Load correctly for best washing results.
Incorrecl loading may cause poor washing
and the need to rewash all or part of load.
. Do not prednse normatly soiled dishes.
Select the correct cycle for the load
and use the recommended amount of
detergent.
• Use the Low Energy cycle whenever
possible, The cycle uses less ho[ water
and energy than the Normal Wash cycle.
• Use the Delay Hours feature Io run your
dishwasher during off-peak hours, Local
utilities recommend avoiding heavy usage of
energy at certain times of day.
• Use the Air Dry opLion whenever possible.
Allow longer drying times (overnight), Use
a rinse agent Lo improve drying.
• Do not use POWER SCOUR* or
SANI RINSE* if it is not needed.
• Loads may not wash or dry as well if the
water temperature is too low. For best
dishwashing results, water must be at least
!20°F (49°C) as it enters the dishwasher.
To check water temperature:
1, Run the hot water at the faucet closest to
your dishwasher, Let the water
run rot at least 1 minute.
2. Hold a candy or meat thermometer in the
running stream of water, If the
water temperature at the faucet
is below 120°F (49°C), have a
qualified person raise the water
heater's thermostat setting,
23