Table of Contents
Advertisement
Touch Screen
The LCD touch screen is used to input commands.
A light- to
medium-pressure
touch of the fingertip will activate the menu
choice. However, sensitivity of the touch screen may vary, and
using the tips or backs of fingernails may provide more accuracy
when inputting commands.
The following illustrates how the touch screen display screens
help the navigation through menus. This example shows the
display screens and selections when cooking chicken pieces.
1. From the "Home" screen, touch "Cook." Display shows:
Cook
I Frozen
Food
2. Touch "More Choices." Display shows:
_J
3. Touch "Poultry." Display shows:
4.
Poultry
Concise
€onelss
Poached
PanCrown
cone-In
Tenders
CACK
Ground I
Touch "Pieces, Bone-In." Use number pads to enter weight.
Display shows:
Pieces noNE-,.
Cooks 0.5-2.0 Pounds.
ENTER
AMOUNT.
PRESS
PREPARE,
DONENESS,
OR START
BACK
Start I
Touch "Doneness" if desired. (See "Doneness" in the "Oven
Use" section.
Display shows:
Doneness
Press + button to
change doneness level.
I
LESS
NORMAL
MORE
Normal is lowest _
"}
allowed for
leV_lhis food.
L/J
BACK
Start
_
6. Touch "Start." While cooking, display shows:
:37
Cooking_,
When cooking
is over, display shows:
Let stand 3 minutes
covered.
Remove
food
or
press
Warm
Hold,
Hold
See "Learning Mode" section to see how to practice navigating
through the menus without turning on the microwave generator.
See "Display Brightness and Contrast" section to see how to
adjust display settings.
1. Progress bar
The progress bar is a visual picture of the estimated running time
of a cooking cycle. It will appear during sensor cooking functions.
The line appears below the word "Sensing," and shows progress
by the darkening of the line from the left. After the sensor is
finished sensing, the remaining cook time replaces the word
"Sensing" at the top of the display, but the progress bar
continues to be displayed.
Advertisement
Table of Contents
