Whirlpool WFW94HEAC0 Use & Care Manual page 12

1 2, Touch and hold START to begin
wash cycle
_)));)iiii(iiJ)/)D
Hold to Start
Touch and hold START to start the wash cycle. To pause a
cycle in progress, touch START once, then touch and hold
again to continue the cycle. To cancel a cycle, touch POWER.
Once you touch and hold START, you will hear the door lock,
unlock, and lock again. The washer door will remain locked
during the wash cycle.
Unlocking the door to add garments:
If you need to open the door to add 1 or 2
missed garments, you may do so while the
"Add Garment" light is lit.
Touch START once; the door will unlock
once the washer movement has stopped.
This may take several minutes. Then close
door and touch and hold START again to
restart the cycle.
<_ Add Garment
ii
Hold to Start
13.
Remove garments promptly
after cycle is finished
for small items between the tub and the washer drum.
If you will be unable to remove the load
promptly, use the Fan Dry or TumbleFresh
TM
option (depending on model). If selected,
the Fan Dry option will activate the fan and
tumble the load periodically for up to 12 hours.
The TumbleFresh
TM
option will tumble the
load periodically for up to 6 hours. To turn off
the Fan Dry or TumbleFresh
TM
option, touch
POWER. To set the washer so that the Fan Dry/TumbleFresh r=
option does not come on for future cycles, touch Fan Dry or
TumbleFresh '=.
Fan Dry
OR
i
Tumb(eFresh
NOTE:
m The door will remain locked while the Fan Dry/TumbleFresh
TM
option is active. To cancel the option and unlock the door,
touch POWER.
[] A small amount of water may remain in the dispensers after
the wash cycle is complete. This is normal.
[] This washer has a tight seal to avoid water leaks. To avoid
odors, leave the door open to allow the washer to dry
between uses.
12