Download Print this page
Whirlpool  WFW94HEXW Product Dimensions
Whirlpool  WFW94HEXW Product Dimensions

Whirlpool  WFW94HEXW Product Dimensions

Front-loading automatic washer
Hide thumbs Also See for  WFW94HEXW:

Advertisement

PRODUCT MODEL NUMBERS
WFW94HEX, WFW95HEX,
WFW97HEX
Electrical: A 120 volt, 60 Hz., AC only, 15- or 20-amp,
fused electrical supply is required. A time-delay fuse
or circuit breaker is recommended. It is recommended
that a separate circuit serving only this appliance
be provided.
Drain System Options
Drain system can be installed using a floor drain, wall
standpipe, floor standpipe, or laundry tub. Select
method you need.
IMPORTANT: To avoid siphoning, 4.5" (113 mm) of
drain hose should be inside standpipe or below the top
of wash tub. Always secure drain hose with beaded tie
strap.
Floor standpipe drain system
4
"
1
/
2
(113 mm)
Minimum diameter for a standpipe drain: 2" (51 mm).
Minimum carry-away capacity: 17 gal. (64 L) per minute.
A
/
" (6 mm) diameter to 1" (25 mm) diameter Standpipe
1
4
Adapter Kit is available (Part Number 280130). To order,
please see toll-free phone numbers on front page of your
Washer User Instructions. Top of standpipe must be at
least 30" (762 mm) high; install no higher than 96" (2.44 m)
from bottom of washer. If you must install higher than 96"
(2.44 m), you will need a sump pump system.
Wall standpipe drain system
4
1
/
"
2
(113 mm)
Floor drain system
Floor drain system requires a Siphon Break Kit (Part
Number 285834) and additional drain hose (Part Number
8318155) with a connector kit (Part Number 285835) that
may be purchased separately. To order, please see toll-
free phone numbers in your Washer User Instructions.
Minimum siphon break: 28" (711 mm) from bottom of
washer. (Additional hoses might be needed.)
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Front-Loading Automatic Washer
Washer dimensions
27"
51"
(686 mm)
(1295 mm)
Recessed area or closet installation (washer only):
4"
(102 mm)
(25 mm)
Recessed area or closet installation
(stacked washer and dryer):
5"
(127 mm)
1"
(25 mm)
Laundry tub drain system
4
1
/
"
2
(113 mm)
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.

OVERALL DIMENSIONS

Custom under counter installation:
38"
(965 mm)
31
/
"
1
2
1"
(800 mm)
(25 mm)
3"
(76 mm)
34" min.
(864 mm)
3"
(76 mm)
1"
(25 mm)
1"
6"
(152 mm)
3"
(76 mm)
48 in.
2
(310 cm
)
2
/
77
"
1
2
(1969 mm)
24 in.
2
(155 cm
)
2
3"
(76 mm)
1"
(25 mm)
Minimum capacity: 20 gal. (76 L).
Top of laundry tub must be at least
30" (762 mm) above floor; install no
higher than 96" (2.44 m) from bottom
of washer.
min.
30"
(762 mm)
39" min.
(990 mm)
1"
(25 mm)
48 in.
2
(310 cm
)
2
24 in.
2
(155 cm
)
2
Custom cabinet installation:
7"
(178 mm)
14"
(356 mm)
4"
(102 mm)
(25 mm)
1"
(25 mm)
Ref. W10254447
08/2010
1"

Advertisement

loading