Whirlpool MH7110XB Use And Care Manual page 56

PROBLEM
Microwave
cooking times
seem too long
The Display
shows a time
counting down
but the oven is
not cooking
You do not hear
the Program-
ming Tone
The microwave
oven turns off
too soon or not
soon enough
when using the
Temperature
Probe
POSSIBLE CAUSE
The electric supply to your
home or wall outlets is low or
lower than normal.
The Cook Power is not at the
recommended setting.
There is not enough cooking
time for the amount of food
being cooked.
The oven door is not closed
completely.
You have set the controls as a
Minute Timer.
The command is not correct.
SOLUTION
Probe is not pushed far
enough into the food.
Probe is not positioned
correctly in the food.
When cooking roasts, you
have not let roast stand after
cooking.
Probe is not plugged in
correctly.
Cook Power is not set
correctly.
Probe temperature is not set
correctly.
There has been a power
interruption.
Your electric company can tell you if
the line voltage is low. Your electrician
or service technician can tell you if the
outlet voltage is low.
Check "Microwave cooking chart" on
page 51.
Allow for more time when cooking more
food at one time.
Completely close oven door.
Touch TIMER OFF to cancel the
Minute Timer.
Re-enter command.
Insert at least 1/3of probe into the food.
Position probe tip in the center of
the food.
Allow roast to stand for a few minutes
after cooking.
Plug probe tightly into its socket.
Reset the Cook Power.
Reset the probe temperature.
The Display Reset the clock.
shows "888:88"
56