Whirlpool MH7110XB Use And Care Manual page 49

2. Remove the bulb cover mounting screws.
3. We recommend replacing bulb(s) with
candelabra-base 30-watt bulb(s) available
from your authorized Whirlpool service
company (Part No. 4158432).
4. Turn the power back on at the main
power supply.
The oven light
4. Remove bulb holder mounting screw.
1. Turn off power at the main power supply.
5. Lift up the bulb holder.
6. We recommend replacing the bulb with a
candelabra-base 30-watt bulb available
from your authorized Whirlpool service
company (Part No. 4158432).
7. Replace the bulb holder and mounting
screw.
2. Remove the vent cover mounting screws.
3. Tip the cover forward, then lift out to
remove.
8. Slide the top of the vent cover into place.
Push the bottom until it snaps into place.
Replace the mounting screws. Turn the
power back on at the main power supply.
49