SETTINGS
Setup menu
/
SETUP
1)
Note
Hold down the SETUP key to display "OSD LANGUAGE" directly on
the screen (☞p. 22, 65).
y
2)
The ENTER key performs the same function as the
58
En
A variety of settings for this unit can be specified and adjusted
from the setup menu. Among the options available are the sound
beam output method for optimal surround sound effects, speaker
volume control, and HDMI settings.
• The setup menu is displayed on, and operated from, the TV
screen (it cannot be displayed in the front panel display). See
"Displaying the menu screen on the TV" (☞p. 21) for
instructions on displaying the setup menu on the TV.
Setting the setup menu
1
Press the SETUP key.
ENTER
RETURN
2
Press the
then press the
Repeat these steps to display the desired menu.
3
Press the
value of each menu.
4
Press the SETUP key again to exit the
setup menu.
Press the
y
3)
The default settings are marked with "*".
y
4)
The RETURN key performs the same function as the
key.
1)
SETUP MENU
BEAM
IntelliBeam
SOUND
HORIZONTAL ANGLE
HDMI
BEAM TRAVEL LENGTH
yAired
FOCAL LENGTH
DISPLAY
IMAGE LOCATION
INFORMATION
CHANNEL OUT
/
key to select a menu and
2)
key.
SETUP MENU
BEAM
IntelliBeam
SOUND
HORIZONTAL ANGLE
HDMI
BEAM TRAVEL LENGTH
yAired
FOCAL LENGTH
IMAGE LOCATION
DISPLAY
INFORMATION
CHANNEL OUT
/
key to change the setting
3)
4)
key
to return to the previous menu.
key.