Sewing With The Optional Hemmer Foot (For 2 Dial Model) - Singer 3820 Instruction Manual

D Sewing with the optional hemmer foot (For 2 dial model)
* The hemmer foot is an optional accessory not supplied with
your machine.
For hems in fine or sheer fabrics.
I
Set the stitch pattern dial to (_) ) (1).
Change to optional hemmer Foot.
Optional hemmer foot
(Available from your local dealer)
Stitch length dial
Neaten the edge of the fabric. At the beginning of the hem,
turn under the edge twice by about 3 mm (1/8") and sew 4-5
stitches to secure. Pull the thread slightly towards the back.
Insert the needle into the fabric, raise the presser foot and
guide the fold into the scroll on the foot (2).
Gently pull the fabric edge towards you and lower the presser
foot.
Begin sewing, guiding the fabric into the scroll by holding it
upright and slightly to the left (3).
36