[] Attaching the presser foot holder
Raise the presser
bar (a). Attach
the presser
foot holder
(b)
as illustrated.
Attaching the presser foot
Lower the presser foot holder (b) until the cut-out (c) is directly
above the pin (d).
Raise the lever (e).
Lower the presser foot holder (b) and the presser foot (f) will
engage automatically,
Removing the presser foot
Raise the presser foot.
Raise the lever (e) and the foot disengages.
Attaching the seam guide
Attach
the seam
guide
(g) in the slot as illustrated. Adjust
according
to need for hems,
pleats,
etc.
Attention:
Turn power switch to "off' when carrying out any of the
above operationsf
i
t
O
I
"