Table of Contents
Advertisement
F-type connector
75-ohm coaxial cable
F-type connector
should be finger-tightened
only.
When connecting
the RF cable to theTV set, do not
tighten F4ype connector with tools.
If tools are used, it may cause damage to your TV
seL
(The breaking of internal circuit, etco)
o A 75 ohm coaxial cable connector is built into the set for easy hookup When connecting the 75 ohm
coaxial cable to the set, screw the 75 ohm cable to the COAXIAL CABLE CONNECTOR
• Some cable TV companies
offer "premium pay channels". Since the signals of these premium pay
channeis are scrambled, a cable TV converter/descrambler
is generally provided to the subscriber
by
the cable TV company. This converter/descrambler
is necessary for normai viewing of the scrambled
channels. (Set your TV on channel 3 or 4 Typically one of these channels is used. If this is unknown,
consult your cable TV company.) For more specific instructions
on installing cable TV, consult your
cable TV company
One possible method of utilizing the converter/descrambler
provided
by your
cable TV company is explained below.
Please note: RF switch equipped with position AiB (not provided) is required
"A" position on the RF switch (not supplied)
: You can view atl unscrambled channels using theTV's
channel keys
"B" position on the RF switch (not supplied)
: You can view the scrambled channels via the converter/
descrambler
using the converter's channel keys
RF switch (not supplied)
Two-set 1
____
A_LI_
'
signal
_._
_OU_L=
j iN_=_
__._J splitter
_
Cable TV Line
Cable TV converter!
descrambler
(not supplied)
o Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that
might be required.
Advertisement
Table of Contents
