Blue Screen - Sharp 27SF56B Operation Manual

9 Enter a 4-digit secret NOr using the REMOTE KEYPAD
1 0 Press MENU to exit,
QQ@
G
MENU
/:,},/i, ii
Example:
,, To restrict anybody from watching TV for more than 5 hours, after
watching the TV for 2 hours, your settings would look like the one on
the right
o You can choose to watch the 2 hours of TV as you wish,, For example,
you could watch 1 hour of TV, turn the TV off for 30 minutes, then turn
the TV on and watch the remaining 1 hour of the VIEWING TIME,
v I E_,'4 TIMER
VIB_'I_G TIME
2H OOM
OFF TIME
5H OOM
OSTATUS :011
e To change the VIEWTIMER setting after registering a secret No.
1 Repeatstepslto4ofHowtosetVlEWTIMER PressVOL +/-,
and "INPUT SECRET No" will be displayed,
INPUT SECRE_ N_
2
Enter the 4-digit secret No, using the REMOTE
KEYPAD, and the VIEW TIMER access screen wilt
be displayed, Repeat steps 5, 6,
o When you choose the correct secret No, the VIEW TIMER access
screen is displayed° If the wrong secret No is chosen, "SECRET No
IS INCORRECT" is displayed, Input the secret No, again in this case,
SECRET _o _S INCORRECT
0
I
To cancel the VIEW TIMER (While the TV set is OFF but the VIEW
TIMER is set,)
Turn on the TV; a blue screen message "TIME OVER" will appear,
If you do nothing, the TV will turn off in approximately 30 seconds,
TiME OVER
INPUT SECRET No
2
Enter the 4-digit secret No, using the REMOTE
KEYPAD. When you choose the correct secret No,,
the VIEW TIMER is canceled,. If the wrong secret No,
is chosen, "SECRET No, IS INCORRECT" is
displayed, Input the secret No., again in this case,
qD @@
@@
TIME OVER
IHPUT SECRE'f tlo
29