Table of Contents
Advertisement
Notes:
° COMPONENT
terminals are DVD compatible,
allows you to enjoy the highest quality playback
image than the image from IN 1 S-VIDEO terminal
o The IN I S_VlDEO terminal is used to obtain a higher quality image by importing image signals
• The S-VIDEO terminal is for the video image only To receive an audio signal, connect the audio
cable to the IN t AUDIO terminals
(left and right),,
TO S-VIDEO OUTPUT
I
,...
(When your video
!
equipment has an
!
S-VIDEO output terminal )
i
"', To VIDEO OUTPUT
_To
AUDIO OUTPUT {L)
To AUDIO OUTPUT (R)
(Rear connection terminals of TV)
UNe
N'_:
: :
To AUDIO
VIDEO OUTPUT
OUTPUT (L/R) _ _
Terminals
Video Equipment
with Component
video (ComponentColor)
Output Terminals (Y,PBand PR)
e
To watch video material
playback
= Press the Remote's INPUT button to select the VIDEO INPUT mode for the video equipment
you
wish to play.
• The external VIDEO INPUT mode will change as follows each time the INPUT button is pressed,
l
CABLE
Rear
Front
Rear
, When the AV cables are connected to the VIDEO INPUT 3 and COMPONENTY,
P8 and PR terminals
simultaneously,
the COMPONENT
terminal has priority over the VIDEO terminal,
= INPUT mode can be selected by pressing either the CH ,& on theTV remote control when the TV is
set to the highest channel stored in memory, or by pressing the CH V"when it is set to the lowest
channel,
o When connecting
video or audio equipment to the television, be sure that the power is turned off in
order to prevent damage to either the television or the equipment being connected,
o The S-Video terminal has priority over the VIDEO terminal (IN 1), When you wish to use video equipment
connected to the VIDEO terminal (IN 1), unplug equipment connected to the S-VIDEO terminal.
. For detailed information
on the connection
and use of auxiliary equipment,
refer to the instruction
manuals of the equipment being used.
- The connection
cables/cords
can be obtained from your local video store.,
45
Advertisement
Table of Contents
